Reciprocating Compressor Unit

Reciprocating Compressor Unit (Technical Parameters)
Range of Presure Suction Pressure >0.07MPa, Discharge Pressure <70MPa
Range of Power Max. 7,350kW
Range of Capacity Max. 300 x 104Nm3/d
Range of Rotating Speed Max. 1800rpm
Driving Method Motor/Diesel Engine/Gas Engine
Cooling Method Air/Water Cooling
Applications Gas Injection, Gas Gathering, Gas Lifting, Gas Storage, Gas Boosting, Gas Transmission, LNG Station, etc.
Driver Motor: ABB / SIEMENS Engine: Caterpillar / Waukesha

Key Product Features

  • Designing and manufacturing in accordance with ISO 13631 and API618 standard and specification
  • Annual running time up to 8,000 hours and 25 years’ service life
  • Wide range of application condition, with good performance under complex working conditions such as extremely cold, high temperature and acid gas
  • Customized control & operating systems

Centrifugal Compressor Unit

Technical Parameters

Type     Horizontal Split  Vertical Split Integrally-Geared
Max. Discharge Presure 5MPa 70MPa 10MPa
Max. Shaft Power 60,000kW 60,000kW 30,000kW
Range of Capacity 10 – 8,000m3/min   10 – 8,000m3/min 15 – 10,000m3/min
Range of Rotating Speed 3,000~20,000rpm   3,000~20,000rpm 3,000~50,000rpm
Driving Method Steam Turbine / Gas Turbine / Motor
Cooling Method Air/Water Cooling
Applications Oil & Gas Industry, Petrochemical Industry, Air Separation, Power Generation, Environment Protection, Coal Chemical, Gas Boosting, etc
Compression Stage 2 – 11 2 – 11 1 – 8

Key Product Features

  • Designing and manufacturing in accordance with API617 standard and specification
  • Continuous running up to 40,000 hours without interruption for maintenance and 30-year service life
  • Minimum consumables and very low maintenance
  • Suitable for large flow condition, gas transmission continuous, stable pressure and without pulsation
  • Capacity controlled by using throttling, by-pass system and variable speed

Screw Compressor Unit

Technical Parameters

Screw Compressor Unit
Range of Presure

Max. Discharge Pressure 3MPa

Range of Power Max. 3,000kW
Range of Capacity Max. 38 x 104Nm3/d
Range of Rotating Speed Max. 4500rpm
Driving Method Motor/Diesel Engine/Gas Engine
Cooling Method Air/Water Cooling
Applications Gas Injection, Refrigeration, Gas Recycling,  Fuel Gas Boosting, Gas Transmission, etc.
Driver Motor: ABB / SIEMENS
Engine: Caterpillar / Waukesha

Key Product Features

  • Designing and manufacturing in accordance with API619 standard and specification
  • Suitable for low suction pressure working condition
  • Design for continuous running, high reliability and minimum vibration.
  • Low wear & tear parts, low maintenance cost and minimum downtime
  • Annual running time up to 8,000 hours and 25 years’ service life
  • Wide range of application condition, with good performance under complex working conditions
  • Customized control & operating systems

Air Compressor

Technical Parameters

Air Compressor
Range of Presure Max. Discharge Pressure 500psi
Range of Power Up to 450kW
Range of Capacity Up to 85m3/min
Driving Method Motor/Diesel Engine
Cooling Method Air/Water Cooling

Key Product Features

  • Characteristics & Standard Configuration
    • High quality screw assembly
    • Outlet end uses tapered roller bearings to prolong air end lifetime
  • Double Stage Oil Separator Element
    • Adopts two-stage nested separation. Its folded professional filter material can make filter area increase, and oil content in discharge air up to 1 PPM, with a lifetime of over 8,000 hours. When it provides clearer compressed air to customers, it reduces the burden of post- processing equipment.
  • Sullair Air Compressor Standard Options
    • Two-stage oil separator element
    • Sullair SULLUBE 8,000 hours, biodegradable synthetic based lubricating fluid
  • Inlet Capacity Adjustment Valve .
    • Inlet capacity adjustment valve can effectively decrease the times of loading and unloading of air compressor, and adjust inlet capacity within the range between 40% and 100% of actual air capacity used by customer, better meeting customer’s requirement for air use and saving energy consumption. And it can effectively decrease load impact and prolong the lifetime.